Description
1350 High Strength Steel Heavy Duty Driveshaft Rear For 2 doors Jeep 2007-2018 Wrangler JK
Jeep JK drive shaft noise… it is a common problem and is inevitable on nearly all lifted
Jeep JK Wranglers. It comes down to the design. The stock drive shafts use Rzeppa CV joints that were designed only to work in stock Jeeps. Just a few inches of lift is enough to cause these CV joints to fail (watch the video below). JK drive shaft rebuild kits just don’t cut it. That is why almost all JK drive shaft replacements are upgraded to a double cardan design (a double cardan is also commonly called a cv). This shaft will handle the angles that your stock drive shaft can not.
The double cardan drive shaft is a time tested design that has proven itself in thousands of other Jeeps.
Tom Wood’s 1350 series JK rear shaft comes with the required output yoke for the transfer case and the required pinion flange.
If you have a suspension lift, you may need to rotate the differential for the CV type drive shaft. This is typically done with adjustable control arms. Pinion should be approximately 1 to 3 degree’s lower than the slope of the drive shaft.
- Place of Origin: China
- Warranty: 1 Years
- Brand Name: PBTECH
- Car Make: Jeep 2007-18 Wrangler JK 2 doors only
- Fitting Position: Rear
- Quality: High Quality-Tested
